Men's Two-Tone CZ Band Ring in Steel
For the man who keeps his word.
Two minutes with a strip of paper or a soft tape and you will order the right size first time.
Shown in inches and US sizesMeasure at home in 2 minutes
You need a strip of paper (or a string or shoelace), a pen and a ruler.
With a ring that fits (most accurate)
- Lay a ring you wear on that finger on the ruler and measure the inside diameter, edge to edge, in inches.
- Find that diameter in the table below.
With a strip of paper
- Wrap the strip around the base of your finger: it must still slide over the knuckle.
- Mark where it overlaps, lay it flat and measure it in inches: that is the circumference. Find it in the table below.
Measure at the end of the day, when fingers are slightly larger.
No ruler? A bank card is 3.4" long: count how many fit along your strip.
| US | EU | UK | Diameter | Circumf. |
|---|---|---|---|---|
| 5 | 49 | J½ | 0.62" | 1.94" |
| 6 | 52 | L½ | 0.65" | 2.04" |
| 7 | 54 | O | 0.68" | 2.14" |
| 8 | 57 | Q | 0.71" | 2.24" |
| 9 | 59 | S | 0.75" | 2.34" |
| 10 | 62 | U | 0.78" | 2.44" |
| 11 | 65 | W | 0.81" | 2.54" |
| 12 | 67 | Y | 0.84" | 2.65" |
| 13 | 70 | Z+1 | 0.87" | 2.74" |
| 14 | 72 | Z+3 | 0.91" | 2.85" |
| 15 | 75 | Z+4 | 0.94" | 2.94" |
| 16 | 77 | Z+6 | 0.97" | 3.04" |
Half sizes sit halfway between two rows (about 0.4 mm of diameter).
Good to know: measure at the end of the day, when fingers are slightly larger. Wide bands (8 mm and more) feel tighter: if you are between two sizes, take the larger one.
A brushed stripe, notched edges and one small stone.
Atlas took on the sky and made it look like routine. Good design hides its effort the same way. This wide stainless steel band runs a brushed center stripe between polished, grooved edges, with small geometric notches you can feel with a thumb. One small cubic zirconia sits flush in the stripe: it catches light when you move and disappears when you do not. Silver, black and silver, or gold and silver, US sizes 6 to 13.
- No rust from sweat, sea or shower
- Brushed stripe, notched polished edges
- Three finishes, US 6 to 13
Details & specs
The band is stainless steel with an electroplated finish, offered in all silver, black and silver, or gold and silver. The center stripe is brushed for a soft matte tone, framed by polished raised edges that stay bright. The black and gold areas are plated colors over the steel, so treat them as a finish.
Small geometric notches are cut along both edges, giving the profile a texture you can feel with your thumb. A round cubic zirconia is set flush into the center stripe, level with the surface, so it has nothing to catch on clothing. The inside of the band is smooth and polished, which makes it easy to slide on.
How to wear it
Wear it alone on the ring finger for a clean everyday look, or on the index with a steel or leather watch for something more deliberate. Silver reads neutral with a white tee and jeans; black and silver works with darker clothing and evening plans; gold and silver pairs with a gold-tone chain or watch. It suits the office and a wedding alike.
Choosing your size
This ring comes in US sizes 6, 7, 8, 9, 10, 11, 12 and 13. If you know your size, order it as is; because this is a wide band, some men prefer one size up for easier sliding over the knuckle. If unsure, measure a ring you wear on the same finger, or wrap a strip of paper around the finger and compare it with a size chart.
Why this piece
Depth from two finishes
A brushed center against polished edges gives the ring depth, so it looks considered rather than plain.
Steel for real life
Stainless steel does not rust and does not turn your skin green, so it stays on through hand washing, the gym and the beach.
A gift for the man who carries everything
For a boyfriend, a brother-in-law or a father who likes a bit of detail. Size 10 is the most common men's size, and you have 30 days to return it.
Shipping & delivery
Free tracked shipping over $75
Below that, a flat tracked rate is shown at checkout.
- 1Order confirmedYou get an email straight away.Today
- 2Order processedEach piece packed on its own, tracking link by email.Within 24 hours
- 3At your doorDelivery times vary by country.
Returns
30 days to return
Any unworn piece in its original packaging, refunded in full to your original payment method. Return shipping is at your expense, except for a defective or wrong item.
- 1Contact usSend us a message with your order number.Within 30 days
- 2Send it backWe reply with the return steps.
- 3RefundedIn full, once the piece is back with us.
Wrong size? Order the size you need and return the other one within 30 days.
Warranty & care
1-year warranty
Against manufacturing defects. See how the warranty works.
Questions
Can the brushed CZ band stay on through hand washing and the gym?
Yes. Stainless steel does not rust, and the cubic zirconia sits flush in the center stripe. Dry it afterward to keep the brushed stripe even.
Will the black and gold parts last?
They are plated finishes made for daily wear. They last longer away from bleach and abrasives, and if you put the ring on after perfume sprays.
Can the stone catch on things?
No. It is set flush in the center stripe, level with the surface, so there is no prong to catch or bend.
What are the notches on the edges?
Small geometric notches cut along both polished edges, a texture you can feel with your thumb.
Is the center stripe matte?
Yes. It is brushed to a soft matte tone, framed by polished raised edges that stay bright.
Is the all-silver version plated?
Yes. The band has an electroplated finish in all three versions; on the two-tone versions, the black or gold-tone areas are plated colors over the steel.
Where does the stone sit?
In the brushed center stripe: one round cubic zirconia (CZ), flush with the surface.
Is it formal enough for a wedding?
Yes. The polished edges and single flush stone look neat under a shirt cuff, and the all-silver version is the most neutral of the three.