![Atlas scrollwork bead braided leather bracelet in black leather and steel [c:black]](http://www.atlasmens.com/cdn/shop/files/atlas-scrollwork-bead-braided-leather-bracelet-black-leather-and-steel.jpg?v=1791912431&width=120)
Men's Braided Leather Bracelet with Steel Bead
7.5"
$59.99
Skip to product information
![Atlas scrollwork bead braided leather bracelet in black leather and steel [c:black]](//www.atlasmens.com/cdn/shop/files/atlas-scrollwork-bead-braided-leather-bracelet-black-leather-and-steel.jpg?v=1791912431&width=3840)
![Atlas scrollwork bead braided leather bracelet in black leather and steel [c:black]](http://www.atlasmens.com/cdn/shop/files/atlas-scrollwork-bead-braided-leather-bracelet-black-leather-and-steel.jpg?v=1791912431&width=3840)
Men's Braided Leather Bracelet with Steel Bead
For the man who always shows up.
$59.99
7.5" bracelet · fits a 6.5–7" wrist
Atlas fit
Find your bracelet length
Two minutes with a strip of paper or a soft tape and you will order the right size first time.
Shown in inchesMeasure at home in 2 minutes
You need a strip of paper (or a string or shoelace), a pen and a ruler.
- Wrap the strip around your wrist, just above the wrist bone, snug but not tight.
- Mark with the pen where the end overlaps.
- Lay it flat and measure from the end to the mark: that is your wrist size.
- Find your wrist in the table below and read the bracelet length, close fit or looser.
Already have a bracelet that fits well? Lay it flat, clasp closed, measure it end to end and order that length.
No ruler? A bank card is 3.4" long: count how many fit along your strip.
| Your wrist | Close fit | Loose fit |
|---|---|---|
| 6" | 6.5" | 7" |
| 6.5" | 7" | 7.5" |
| 7" | 7.5" | 8" |
| 7.5" | 8" | 8.5" |
| 8" | 8.5" | 9" |
| 8.5" | 9" | 9.5" |
| 9" | 9.5" | 10" |
Between two lengths? Take the longer one for a chain bracelet, the shorter one for a cuff or a beaded style.
Still unsure? Message us with your measurement and we will tell you which size to order.
Two leather braids, one etched steel bead, mixed metal at the center.
Atlas never set the world down. You keep going too, and a bracelet worth wearing should keep up. Two strands of braided black leather wrap the wrist for a full, textured feel. At the center, a polished stainless steel bead carries an etched scrollwork pattern, framed by two gold-tone rings. A black steel tube clasp closes it in one move. Lengths: 7.5, 8.5 or 9 inches.
- Two braided strands for a stacked look
- Scrollwork steel bead, gold-tone rings
- Tube clasp in black-finish steel
Details & specs
MaterialLeather, stainless steel
ConstructionTwo braided strands
FinishBlack, gold-tone, silver-tone
ClosureTube clasp
Length7.5": 19.5cm (7.7 in) · 8.5": 21.5cm (8.5 in) · 9": 23.5cm (9.3 in)
The band is two strands of braided black leather, flexible and comfortable from the first day and softer with every week of wear. Together they give the visual weight of two stacked bracelets while you only fasten one. The hardware, from the central bead to the clasp, is stainless steel, so it does not rust.
The centerpiece is a polished steel bead with a classic scrollwork pattern, set between two gold-tone rings. The gold-tone and the black on the clasp are applied finishes, chosen to give the steel some contrast against the leather. Leather is the fragile part: take it off for the shower, the pool and the sea, and let it dry naturally if it gets wet.
How to wear it
With a plain t-shirt and rolled sleeves it reads as a confident piece on its own. The mix of silver and gold-tone means it sits easily beside a steel watch or a gold-tone one, so you do not have to match. Under the cuff of a casual shirt it shows only when you reach across the table.
Choosing your size
Three lengths: 7.5", 8.5" and 9". Measure his wrist with a flexible tape, then add about 0.5 to 1 inch for comfort. The bracelet should move slightly without sliding over the hand. If the wrist measures close to the line between two lengths, choose the longer one: a little room keeps the braids comfortable through the day.
Why this piece
Layered, not bulky
Two strands give the look of a stack in one piece, slim enough to wear next to a watch.
Detail at the center
An etched scrollwork bead between gold-tone rings gives the black leather a single point of light.
A gift for the man who carries everything
For a brother, a husband or the friend he calls first. Measure a bracelet he already owns, or pick 8.5" for an average wrist; you have 30 days to return it.
Shipping & delivery
Free tracked shipping over $75
Below that, a flat tracked rate is shown at checkout.
- 1Order confirmedYou get an email straight away.Today
- 2Order processedEach piece packed on its own, tracking link by email.Within 24 hours
- 3At your doorDelivery times vary by country.
Returns
30 days to return
Any unworn piece in its original packaging, refunded in full to your original payment method. Return shipping is at your expense, except for a defective or wrong item.
Wrong size
Changed your mind
Not what you expected
- 1Contact usSend us a message with your order number.Within 30 days
- 2Send it backWe reply with the return steps.
- 3RefundedIn full, once the piece is back with us.
Wrong size? Order the size you need and return the other one within 30 days.
Warranty & care
1-year warranty
Against manufacturing defects. See how the warranty works.
Put it on lastAfter perfume and lotion.
Made for everyday wearSteel and tungsten won't rust in the shower, gym, pool or sea. Keep leather pieces dry.
Store pieces apartSo they do not scratch each other.
Soft, dry clothA quick wipe keeps the finish bright.
Questions
Should the scrollwork bead leather bracelet stay out of the shower?
Yes. The stainless steel bead and clasp do not rust, but the two leather braids keep their shape and color longer when dry. Let it air-dry if it gets damp.
Does it go with both silver and gold watches?
Yes. The bead is polished steel and the rings are gold-tone, so it sits comfortably next to either. That mix is the point of the design.
How do I pick the length?
Measure the wrist with a flexible tape, add 0.5 to 1 inch, then pick the nearest of 7.5", 8.5" or 9". Between two, go longer.
What is the bead in the middle?
A polished stainless steel bead etched with a classic scrollwork pattern, framed by two gold-tone rings.
Does it look like two bracelets?
Yes. The two braided strands give the look of two stacked bracelets, but there is only one clasp to fasten.
What color is the clasp?
Black. It is a steel tube clasp that closes in one move.
Which wrist does the 8.5 inch scrollwork bead bracelet fit?
A wrist of about 7.5 to 8 in, with 0.5 to 1 inch of room. If he sits close to the line between two lengths, take the longer one so the braids stay comfortable.
Is it a good gift for my husband?
Yes. The mix of silver and gold-tone means it goes with whatever watch he already wears.